Elabox

Web3

Elastos

Installation

Guides And Tutorials

ElaboxOS: DIY, Web3, Elastos, Free…

We are pleased to present our Installation Guide for ElaboxOS, the free, DIY version. Visit www.elabox.com to start your Web3 journey with a self-built Elabox PC2: your very own part of Web3.

ElaboxOS installation requirements:

• SD Card Reader
• SD Card
• Balena Etcher
• RPi

Recommended RPi hardware:

• Raspberry Pi 4B (8GB)
• At least 16GB of MicroSD Card
• Raspberry Pi Power Supply
• Ethernet Cable
• Storage Drive at least 128GB
• Raspberry Pi Casing

Installation:

• Download the Elabox OS image file here.
• Download Balena Etcher. This will be used for flashing the Elabox OS to an SD card. Download it here.
• Extract the Elabox OS image zip file.

• Install Balena Etcher.
• Insert SD Card in an SD card reader.
• Connect the SD card reader to the computer.
• Open Balena Etcher.
• Click “Flash from file”, then select the image file of Elabox OS.

• Click “Select target” and select the connected SD card.

• Click “Flash” and wait for the file to successfully flash to the card.

• Remove the SD card reader. Remove the SD card, insert it in the RPi and turn on the RPi.
• Open PC browser and type “elabox.local/”

• Click “Setup” to start setting up the Elabox.

• Select “External storage” once the flash drive is connected. Click skip if it is not available.

• Click “Connect Essentials” if connecting using a DID. Click “Skip” if setting up locally, without a DID.

• Specify wallet password then click “Next”.

• Wait for the installation to finish.

• Click “Download” after setup to save the keystore to the local computer.

• Congratulations, the Elabox is ready to go.

Installation Guide Video

Website: www.elabox.com

Telegram: t.me/elabox_official

Discord: https://discord.gg/yMgDnq5dMx